Synthetic Grass & Putting Green Descriptions & Artificial Turf Specifications

Wholesale Grass, Materials and Tools - Open to the Public

 
The Spirit Series

The Spirit Series is currently the most popular grass sold in the southwestern states due to its brown thatch zone fiber which imitates the dead grass typically found in the thatch area of our summer grass. The lighter color of the primary fiber also helps keep the grass a little cooler in direct sunlight than our traditional dark green grasses.

This product combines the soft feeling polyethylene primary fiber with a durable texturized polyethylene thatch zone to create a lush feeling grass that will hold up to the desert sun.
 
The spirit series is available in High, Medium and Low denisties. While these products are considered by some to be a non infill product, the Synthetic Grass Store strongly recommends infill in all products as it will extend the life of the grass and make it feel more natural under foot.
 
Please note that the micro (thread like) fibers that appear in some of the pictures are necessary for the manufacturing process and will dissolve after being exposed to moisture several times.  These micro fibers are not typically seen except in these close up side view pictures of new grass.
 
Warranty: 8 year non prorated manufacturer limited warranty
Face weight: High, Medium and low 
Typical pile height: ~ 1.75 inches
Fiber Denier (Linear Density): 10,000 micron
Fiber Thickness (fiber depth): 238 micron
UV Protection: UV inhibitor and stabilizers
Melting Point: 220 Degrees Fahrenheit
Primary 2 layer 13pic polyback weight: ~ 6 - 7.5 oz
Secondary heat activated urethane backing weight: ~ 20 oz
Gauge (distance between stitch rows): varies
Stitch rate over 3 inches on ½" gauge: varies
Perforations: 3/16" diam; min 4" apart on grid both MD & CMD
Perf method: Inline cauterize process through all backing layers.
Minimum Drainage: 35 inches per hour
Tuft Bind Value: up to 12 lbs per sq ft based on backing choice.
Flammability - Pill Burn Test: Pass
Grab Tear Strength: 220 lbs per square foot (MD and CMD)
Backing (roll) width: 15 feet
Force @ 5% elongation (weft): 615 minimum
5% elongation (warp): 410 minimum
Specific Gravity: 0.90
All specifications are subject to change and will be allowed +/- tolerances in manufacturing process.
 The Natural Series
The Natural Series is the softest grass in our product line.  The primary fiber is a soft  polyethylene and the secondary fiber is a soft texturized polyethylene.  This combination makes this product a 100%  polyethylene turf which is why it is the softest.
 
The Natural Series is currently available in 3 colors: Field Green, Fescue & Spring Green. The colors work there way from darkest to lightest  respectively. The lighter the grass the cooler it will be.
 
The Natural series is available in 40 oz, 60 oz, and 80 oz face weights. While the 60 and 80 oz products are considered by some to be a non infill product, the Synthetic Grass Store strongly recommends infill in all products as it will extend the life of the grass and make it feel more natural under foot.
 
Please note that the micro (thread like) fibers that appear in the pictures are necessary for the manufacturing process and will dissolve after being exposed to moisture several times.  These micro fibers are not typically seen except in these close up pictures of new grass.
 
Warranty: 8 year non prorated manufacturer limited warranty
Face weight: as listed in product name 40, 60, 80
Typical pile height: ~ 1.75 inches
Fiber Denier (Linear Density): 10,000 micron
Fiber Thickness (fiber depth): 238 micron
UV Protection: UV inhibitor and stabilizers
Melting Point: 220 Degrees Fahrenheit
Primary 2 layer 13pic polyback weight: ~ 6 - 7.5 oz
Secondary heat activated urethane backing weight: ~ 20 oz
Gauge (distance between stitch rows): varies
Stitch rate over 3 inches on ½" gauge: varies
Perforations: 3/16" diam; min 4" apart on grid both MD & CMD
Perf method: Inline cauterize process through all backing layers.
Minimum Drainage: 35 inches per hour
Tuft Bind Value: up to 12 lbs per sq ft based on backing choice.
Flammability - Pill Burn Test: Pass
Grab Tear Strength: 220 lbs per square foot (MD and CMD)
Backing (roll) width: 15 feet
Force @ 5% elongation (weft): 615 minimum
5% elongation (warp): 410 minimum
Specific Gravity: 0.90
All specifications are subject to change and will be allowed +/- tolerances in manufacturing process.
 
 The Liberty Series
The Liberty Series is the most durable turf in our product line.  The primary fiber is a soft  polyethylene and the secondary fiber is a durable 100 % testurized nylon.  While this nylon is the most durable is is also slightly more abrasive than polyethylene.  Nylon is the most durable and expensive yarn used in our grasses, therefor you will see slightly higher prices for this product.  
 
The Liberty Series is currently available in 3 colors: Field Green, Fescue & Spring Green. The colors work their way from darkest to lightest repectivly. The lighter the grass the cooler it will be in direct sunlight.
 
The Liberty series is available in 48 oz, 69 oz, 72 oz and 90 oz face weights. While products above 60 oz are considered by some to be a non infill product, the Synthetic Grass Store strongly recommends infill in all products as it will extend the life of the grass and make it feel more natural under foot.
  
Please note that the micro (thread like) fibers that appear in the pictures are necessary for the manufacturing process and will dissolve after being exposed to moisture several times.  These micro fibers are not typically seen except in these close up pictures of new grass.
 
Warranty: 8 year non prorated manufacturer limited warranty
Face weight: as listed in product name 48, 69, 72, 90
Typical pile height: ~ 1.75 inches
Fiber Denier (Linear Density): 10,000 micron
Fiber Thickness (fiber depth): 238 micron
UV Protection: UV inhibitor and stabilizers
Melting Point: 220 Degrees Fahrenheit
Primary 2 layer 13pic polyback weight: ~ 6 - 7.5 oz
Secondary heat activated urethane backing weight: ~ 20 oz
Gauge (distance between stitch rows): varies
Stitch rate over 3 inches on ½" gauge: varies
Perforations: 3/16" diam; min 4" apart on grid both MD & CMD
Perf method: Inline cauterize process through all backing layers.
Minimum Drainage: 35 inches per hour
Tuft Bind Value: up to 12 lbs per sq ft based on backing choice.
Flammability - Pill Burn Test: Pass
Grab Tear Strength: 220 lbs per square foot (MD and CMD)
Backing (roll) width: 15 feet
Force @ 5% elongation (weft): 615 minimum
5% elongation (warp): 410 minimum
Specific Gravity: 0.90
All specifications are subject to change and will be allowed +/- tolerances in manufacturing process.